How can we configure SSL VPN in Cisco Firepower - FMC

[harmesh88]

I have requirement to configured SSL VPN IN cisco FMC so i searched about client less vpn but i not getting any specific confguration for it , when we are creating ANYCONNECT that time we have to select SSL that i know.

But if customer want vpn without Client and only using browser they want to conncet VPN is it possible in firepower .

If it is not possible so in future it will come in new release or how it will .

[balaji.bandi]

below guide may help you :

https://www.cisco.com/c/en/us/support/docs/network-management/remote-access/212424-anyconnect-remote-access-vpn-configurati.html

[harmesh88]

This guide also having option for anyconnect client only , we need SSL VPN so user can login through browser and will user VPN connectivity without installing client in their pc -

[Rob Ingram · Accepted solution]

Hi,
As of FTD 6.4 clientless SSL-VPN is not possible.
FTD only (currently) supports AnyConnect Remote Access VPN using either IKEv2 or SSL/TLS.

HTH

[balaji.bandi]

Client less not supported for now,  @Rob Ingram rightly said.