11-07-2018 06:19 AM - edited 03-12-2019 05:31 AM
Good morning
I have a router cisco C1111-4P (1RU) with active security license securityk9. I need to configure a easy vpn client in this router but I found that the CLI commands are different from router Cisco 891F.
Someone can help me to teach how to configure Easy VPN in router Cisco ISR C1111?
My configuration profile for a cisco 891F is as follow:
crypto ipsec client ezvpn 4G
connect auto
group colsubsidio157 key [password]
mode network-extension
peer 190.248.86.82
username [username] password [password]
xauth userid mode local
Thanks for you help
11-07-2018 06:59 AM
Please refer below document for your reference and command syntax:
11-07-2018 07:07 AM
Thanks for you response,balaji.bandi
however, I fing the link is for configuring an easy vpn server but I need to configure an easy vpn client.
Do you know how to configure peer, username and password in an easy vpn client?
08-27-2020 12:49 PM
Hello
Do you now how to configure easyVPN client in router Cisco ISR C1111 (IOS-XE)
Thanks for your help
08-27-2020 12:53 PM
Hi,
EasyVPN is End of Life and now longer support.
You can use FlexVPN instead https://www.cisco.com/c/en/us/support/security/flexvpn/products-configuration-examples-list.html
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: