I am trying to connect to my VPN 3030 thorough a client. Everything goes along fine until the start of Phase 2's Quick mode negotiation when, after starting Quick mode response, VPN Concentrator spits out FSM errors.
I tried to search for their meanings but could not find them. Can anyone point out what is wrong here?
Log snippet:
===========
262 05/05/2005 18:56:27.160 SEV=9 IKEDBG/1 RPT=78
Processing cfg Request attributes
263 05/05/2005 18:56:27.160 SEV=9 IKEDBG/53 RPT=13
MODE_CFG: Received request for IPV4 address!
264 05/05/2005 18:56:27.160 SEV=9 IKEDBG/53 RPT=14
MODE_CFG: Received request for IPV4 net mask!
265 05/05/2005 18:56:27.160 SEV=9 IKEDBG/31 RPT=7 70.0.0.1
Group [70.0.0.1] User [jiva1]
Obtained IP addr (22.0.0.1) prior to initiating Mode Cfg (XAuth enabled)
267 05/05/2005 18:56:27.160 SEV=9 IKEDBG/0 RPT=297 70.0.0.1
Group [70.0.0.1] User [jiva1]
constructing blank hash
268 05/05/2005 18:56:27.160 SEV=4 IKE/149 RPT=13
Hardware client security attribute SECURE UNIT was enabled but not requested.
269 05/05/2005 18:56:27.160 SEV=4 IKE/149 RPT=14
Hardware client security attribute INDIVIDUAL USER AUTH was enabled but not requ
ested.
271 05/05/2005 18:56:27.160 SEV=9 IKEDBG/0 RPT=298 70.0.0.1
0000: 00010004 16000001 ........
272 05/05/2005 18:56:27.160 SEV=9 IKEDBG/0 RPT=299 70.0.0.1
Group [70.0.0.1] User [jiva1]
constructing qm hash
273 05/05/2005 18:56:27.160 SEV=8 IKEDBG/0 RPT=300 70.0.0.1
SENDING Message (msgid=d2309ef5) with payloads :
HDR + HASH (8) + ATTR (14)
total length : 64
275 05/05/2005 18:56:27.160 SEV=8 IKEDECODE/0 RPT=108 70.0.0.1
ISAKMP HEADER : ( Version 1.0 )
Initiator Cookie(8): 3A FE 4F 4B 62 53 9D 29
Responder Cookie(8): 31 D2 B6 A7 45 77 B2 10
Next Payload : HASH (8)
Exchange Type : Oakley Quick Mode
Flags : 1 (ENCRYPT )
Message ID : bddcc8bb
Length : 148
282 05/05/2005 18:56:27.160 SEV=12 IKEDECODE/3 RPT=7 70.0.0.1
IKE Responder starting QM: msg id = bddcc8bb
283 05/05/2005 18:56:27.160 SEV=9 IKEDBG/21 RPT=7 70.0.0.1
Group [70.0.0.1] User [jiva1]
Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progress
285 05/05/2005 18:56:27.160 SEV=7 IKEDBG/65 RPT=9 70.0.0.1
Group [70.0.0.1] User [jiva1]
IKE AM Responder FSM error history (struct &0x7e03ac8)
<state>, <event>:
AM_DONE, EV_ERROR_CONT
AM_DONE, EV_ERROR
AM_TM_PEND_QM, EV_TM_OK
AM_TM_PEND_QM, NullEvent
290 05/05/2005 18:56:27.160 SEV=9 IKEDBG/0 RPT=301 70.0.0.1
