cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
446
Views
0
Helpful
2
Replies

Ipsec site to site vpn with public IP

Hi,

I am configuring ipsec site to site vpn on my cisco 1941 which is also an edge router, PAT for internet access is configured and ezy VPN VTI is also configured for remote users.my concern is the peer wants my site to site traffic to be 82.x.x.x where my local lan subnet is 192.168.0.0/16.

how can i pat 192,168.0.0/16 to 82.x.x.x in ipsec site to site vpn. pls help. its very critical and urgent.

pls revert back if you need any more info pleaasseeeee.

2 Replies 2

Shaoqin Li
Level 3
Level 3

config a route map to match traffic and use it in nat config

Sent from Cisco Technical Support iPad App

Thanks a lot for your reply,

As I mentioned PAT is already running for internet access, i will be very thankful if u can show me the config as to how it can be done

THANKS IN ADVANCE

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: