05-16-2017
01:43 AM
- last edited on
02-21-2020
09:17 PM
by
cc_security_adm
Greetings,
I would like to know what is the alternative for Cisco vpn client.As we have some clients using windows 10.Cisco vpn client is end of support & but we have no issues with Cisco vpn client for other end points except windows 10.
05-16-2017 02:01 AM
Please follow this guide.
http://www.firewall.cx/cisco-technical-knowledgebase/cisco-services-tech/1127-cisco-vpn-client-windows-10-install-fix-442-failed-to-enable-virtual-adapter.html
HTH
Hitesh
Please rate useful posts.
05-16-2017 06:23 AM
Hello Sajid,
Cisco AnyConnect is the current line of VPN client software product line that replaced the EOL Cisco VPN client that you are currently using.
Regards
05-16-2017 11:49 AM
Thanks Guys,
But I got the solution & its working for me.I had a fresh installed end point with windows 10 & i followed this step:-
The solution for me was to install DNE 64bit.
ftp://files.citrix.com/dneupdate.msi for 32-bit
ftp://files.citrix.com/dneupdate64.msi for 64-bit
After installing this, the Cisco VPN software installed without issue.
But while connecting i was getting below error:-
Attached screen shot taken from google image, as my vpn error had gone:-
This got resolved by this fix:-
Click Start and type regedit in the Search field and hit enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CVirtA
Find the String Value called DisplayName
Right click and select Modify from the context menu.
In Value data, remove @oemX.inf,%CVirtA_Desc%;. The Value data should only contain Cisco Systems VPN Adapter for 64-bit Windows.
Click Ok.
Close Registry Editor.
Retry your Cisco VPN Client connection.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: