cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
774
Views
5
Helpful
9
Replies

Issue connect with AnyConnect

MarcoM
Level 1
Level 1

Hi all,

i have a strange issue with Vpn Anyconnect on a platform ASA 5510 with version 9.0(3) and ASDM 7.1(3).

I configured Anyconnect IKEv2 with self-signed certificate.

When connect with Anyconnect client (version 3.1.02040) its fail with this error:

anyconnect.jpg

Same issue with WebLaunch cannot install client.

Please help me.

In attach step of configuration AnyConnect.

Thanks all for reply.

9 Replies 9

Jeet Kumar
Cisco Employee
Cisco Employee

I checked your configuration and your configuration is fine.

Please make sure the primary protocol on the connection profile should be Ipsec and not ssl.

If possible could you please upload the client profile as well.

Thanks

Jeet Kumar

Hi Jeet,

thanks for reply. In attach client profile. i also attached screen of Connection Profiles.

Thanks.

MM

Hi Marco.,

It si possible for you to messgae me the following, if you don't want to pste it here email me.

sh run webvpn

sh run tunnel-group VpnAnyConnect

sh run group-policy VpnAnyConnect

sh version

I will check it and will get back to you.

Hi Jeet,

in attach config required.

Let me know please.

Thanks in advance.

Hi,

for few days i hav had the same issue. The problem could be the Group Policy settings.

You dont use the standard GP right?

Regards

Markus

Hi Markus,

no i use custom GP (as you see on screenshot attached).

How you fixed?

Thanks.

MM

Please use the standard GP. It will be work.

Hi

I will check it and will get back to you.

Thanks

Jeet Kumar

Hi Jeet,

there is news?

let me know please.

Thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: