cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

689
Views
0
Helpful
1
Replies
Highlighted
Beginner

L2TP/IPSEC Client VPN (No Internet)

So lets skip the VPN authentication, connection parts. I already have a connection to the VPN and can ping all the computers on the remote network. All good there. Using only a Win7 VPN Client connected to an ISA570.

The problem is in my VPN settings. As you can notice with my ipconfig command that a gateway is missing (seen by screen1.jpg)

i also found a similar problem in the internet but he is using Win Server as L2TP server. The Step1 in the guide talks about Port Forward and IP route enabling. I wonder how this can be done in the ISA500 (sorry for such a newbie question) if this might solve the problem, it is worth a try.

http://support.microsoft.com/kb/317025

Work Network

192.168.100.XXX

255.255.255.0

VPN Network

192.168.103.XXX

255.255.255.0

I have read somewhere in the forums that Split Tunneling will pose a security risk to the network. But this is for test purposes only and what the boss wants, the boss gets (even if it is not the best practice). Just for the sake of proving that it can be done but not advisable.

Please tell me if you guys need more info of my configurations

1 REPLY 1
Beginner

L2TP/IPSEC Client VPN (No Internet)

Found a solution for this just in case some of you guys have the same problem here.

Followed the config settings of this article. It worked but I am not sure of any drawbacks or security risks involved with this change.

http://www.cisco.com/en/US/docs/security/small_business_security/isa500/administration/guide/ISA500_VPN.html#wp1479596

Anyone willing to help?

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.