cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
486
Views
5
Helpful
1
Replies
Highlighted
Beginner

L2TP/IPSEC - fixed IPs for users (no Radius)

Hello All,

 

I did setup L2TP/IPSEC LAC on my Cisco 1921 without Radius.

Users are being assigned IP address from IP Local address pool.

Is it possible to have the IP addresses fixed?

By fixed I mean user 'A' gets always the same 10.0.0.2 IP, user 'B' gets always 10.0.0.3 IP etc.

 

Thank you,

Filip

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Enthusiast

Re: L2TP/IPSEC - fixed IPs for users (no Radius)

Hello @filip31337

 

As far as I know, that cannot be done on a Router. You can do it on the ASA if the user is local or the authentication is using LDAP and that comes from the server. 

 

HTH

Gio

1 REPLY 1
Enthusiast

Re: L2TP/IPSEC - fixed IPs for users (no Radius)

Hello @filip31337

 

As far as I know, that cannot be done on a Router. You can do it on the ASA if the user is local or the authentication is using LDAP and that comes from the server. 

 

HTH

Gio