cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
720
Views
5
Helpful
1
Replies

L2TP/IPSEC - fixed IPs for users (no Radius)

filip31337
Level 1
Level 1

Hello All,

 

I did setup L2TP/IPSEC LAC on my Cisco 1921 without Radius.

Users are being assigned IP address from IP Local address pool.

Is it possible to have the IP addresses fixed?

By fixed I mean user 'A' gets always the same 10.0.0.2 IP, user 'B' gets always 10.0.0.3 IP etc.

 

Thank you,

Filip

1 Accepted Solution

Accepted Solutions

GioGonza
Level 4
Level 4

Hello @filip31337

 

As far as I know, that cannot be done on a Router. You can do it on the ASA if the user is local or the authentication is using LDAP and that comes from the server. 

 

HTH

Gio

View solution in original post

1 Reply 1

GioGonza
Level 4
Level 4

Hello @filip31337

 

As far as I know, that cannot be done on a Router. You can do it on the ASA if the user is local or the authentication is using LDAP and that comes from the server. 

 

HTH

Gio

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: