Lan to Lan Tunnel ( Group )Concentrator

[admukada]

Hi,

* When we ceate Lan to Lan tunnel in Concentrator ,a group is created for this Lan to Lan under Groups as ( L2L internally configured )Im aware that this is the way it works )

When you Add or Modify a connection on these screens, the VPN Concentrator automatically:

Creates or modifies two filter rules with the Apply IPSec action: one inbound, one outbound, named L2L:<Name> In and L2L:<Name> Out.

Creates or modifies an IPSec Security Association named L2L:<Name>.

Applies these rules to the filter on the public interface and applies the SA to the rules. If the public interface does not have a filter, it applies the Public (default) filter with the preceding rules.

Creates or modifies a group named with the Peer IP address. If the VPN Concentrator internal authentication server has not been configured, it does so, and adds the group to the database.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Question is :

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

* I know that Group name is peer IP.

*What is group password ???

Thanks

Adi

[wisfaque · Accepted solution]

Hi Adi

The clients will not connect as the type in the general or the IPSEC tab of the group is Lan to Lan and not remote.

Also the lan to lan will create a filter rule for the specific lan to lan only.

Also as we discussed you can try manipulating the config file to check that

Hope this helps

Thanks

Wakif