Local unit is failover enabled but is not currently active.

[ronshuster]

Can't run IPSEC sessions... here is a debug... any idea?

ASA5520# debug cry isa 1

ASA5520# Aug 14 11:06:59 [IKEv1]: IKE initiator: Local unit is failover enabled but is not currently active.

Aug 14 11:07:00 [IKEv1]: IKE initiator: Local unit is failover enabled but is not currently active.

Aug 14 11:07:02 [IKEv1]: IKE receiver: Local unit is failover enabled but is not

currently active.

Aug 14 11:07:04 [IKEv1]: IKE initiator: Local unit is failover enabled but is not currently active.

Aug 14 11:07:04 [IKEv1]: IKE initiator: Local unit is failover enabled but is not currently active.

[smalkeric · Accepted solution]

You may try rebooting the PIX.

Reference URL:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094ea7.shtml

[ronshuster]

The reboot works... any idea why?

Thank you very much for your input!