cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
653
Views
0
Helpful
2
Replies
Beginner

Local unit is failover enabled but is not currently active.

Can't run IPSEC sessions... here is a debug... any idea?

ASA5520# debug cry isa 1

ASA5520# Aug 14 11:06:59 [IKEv1]: IKE initiator: Local unit is failover enabled but is not currently active.

Aug 14 11:07:00 [IKEv1]: IKE initiator: Local unit is failover enabled but is not currently active.

Aug 14 11:07:02 [IKEv1]: IKE receiver: Local unit is failover enabled but is not

currently active.

Aug 14 11:07:04 [IKEv1]: IKE initiator: Local unit is failover enabled but is not currently active.

Aug 14 11:07:04 [IKEv1]: IKE initiator: Local unit is failover enabled but is not currently active.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Frequent Contributor

Re: Local unit is failover enabled but is not currently active.

2 REPLIES 2
Highlighted
Frequent Contributor

Re: Local unit is failover enabled but is not currently active.

Beginner

Re: Local unit is failover enabled but is not currently active.

The reboot works... any idea why?

Thank you very much for your input!