06-25-2013 02:44 AM
Dear
Our company using all cisco router 2901 with MPLS to connect all branch office to headquarter office. I would like to know if we want to build a backup internet site to site VPN link in case of MPLS failure. It can automatically failover to Internet site to site VPN if MPLS line is down. What is the best VPN connection method we can use to suit our need? like
1) site to site IPSEC VPN
2) point to point GRE VPN Tunnels or
3) DMVPN?
Please advise, thank you.
Solved! Go to Solution.
06-25-2013 04:23 AM
Alan,
If you're looking for typical hub and spoke configuration without need for spoke to spoke direct tunnels you can used DMVPN phase 1 design (point to point tunnels on spokes, mGRE interface on hub) or FlexVPN.
Routing concepts around this are discussed for example here:
https://supportforums.cisco.com/docs/DOC-5748
Depending on routing protocol used...it will work differently.
M.
06-25-2013 04:23 AM
Alan,
If you're looking for typical hub and spoke configuration without need for spoke to spoke direct tunnels you can used DMVPN phase 1 design (point to point tunnels on spokes, mGRE interface on hub) or FlexVPN.
Routing concepts around this are discussed for example here:
https://supportforums.cisco.com/docs/DOC-5748
Depending on routing protocol used...it will work differently.
M.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: