We have ASA 5510, running IOS 8.2(4). We are setting up two VPN pools for Cisco VPN client. Do we need to setup each NAT statement for each VPN pool? How do we setup the NAT statement for the second VPN pool?
Below is my current config:
ip local pool itvpnpool 209.145.101.65-209.145.101.78 mask 255.255.255.240
ip local pool vpnpool 10.10.8.1-10.10.15.240 mask 255.255.248.0
nat-control
global (Outside) 1 interface
nat (Outside) 1 10.10.8.0 255.255.248.0
Thanks.
Diane
