Pix 501 VPN Wizard, no internet

[dennisvee]

                   Using the straight forward VPN

                    Remote Access to VPN

                    Cisco Client 3.x or higher

                    Group Name & Preshared key (no cert)

                    EECA, Local

                     VPN pool configured

          .....all standard stuff.

I can connect but I cannot access the internet.

Questions:

Why can't I see my network server? I can sort of map a drive by typing in \\myserve\shared folder

Why can't I get on the internet when connected to the VPN?

VPN client 5.0..07.0410

PDM 3.0.4

Pix 6.3.5

Thanks

[dennisvee]

I can now get on the internet, because i enabled split tunneling.

I still can't see my network servers and printers in Windows Explorer, but I can access them if I type in \\server\folder, then login.

Any ideas

[Javier Portuguez]

Hi Dennis,

Did you define a DNS and WINS server for this VPN group?

Have you tried to join the Windows domain before you check the MS neighborehood?

Thanks.

Portu.

Please rate any post you find helpful.

[dennisvee]

I'll try that thanks.

Can I add the Wins server without running the VPN wizard again?

Although, i think i did add the Wins server, but I'll try it.

[Javier Portuguez · Accepted solution]

Yes, you can modify it.

By the way, here is a good link about MS:

Troubleshooting Microsoft Network Neighborhood After Establishing a VPN Tunnel With the Cisco VPN Client

HTH.

Portu.

[dennisvee]

That link is out of date. I'm not using Win 98 or ME.

I'm using Win 7 and Windows 2003 Server.

I'm so close, i just can't see my servers in Explorer.

Anyone else have answerrs?

[dennisvee]

Anyone else have a guess?

The problem has not been resovled.