cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Ask the Expert- SD-WAN

715
Views
0
Helpful
0
Replies
Highlighted
Beginner

pptp vpn and Access List restricted inside addresses

Hello All,

In need of a point in the right direction if you have time.

I have a Cisco 881 with PPTP VPN setup and a number of user accounts for remote support.  All is working ok however the client has requested the creation of a specific user that only has access to 1 single IP on the inside of the network.   Can anyone suggest how I would go about applying an access-list to lock account "cccccc" below down to access 1 internal address.  Please see below my config:

Thanks in advance

Dave

vpdn enable

!

vpdn-group 1

! Default PPTP VPDN group

accept-dialin

  protocol pptp

  virtual-template 1

!

username aaaaaa privilege 15 password 0 bbbbb

username cccccc privilege 0 password 0 ddddd

!

interface Virtual-Template1

description $FW_INSIDE$

ip unnumbered Dialer0

ip nat inside

ip virtual-reassembly in

peer default ip address pool remotepool

no keepalive

ppp encrypt mppe auto passive

ppp authentication chap ms-chap ms-chap-v2

!

interface Vlan1

description Native_Office_Vlan$FW_INSIDE$

  ip address 192.168.1.1 255.255.255.0

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1452

!

ip local pool remotepool 172.16.1.1 172.16.1.10

Everyone's tags (5)