10-10-2008 04:49 AM
Hi!
I try to do static NAT to redirect SIP (udp 5060) from outside ASA interface to CCM 6 on the inside network. NAT works fine (redirect packet to CCM), but inside SIP packet address wasn't changed by ASA, so SIP didn't work. How can I fix this problem?
10-12-2008 02:23 AM
is inspection turned on ?
10-15-2008 04:29 AM
Hi! Yes, "inspection sip" is enabled (global settings). ASA 7.07 version. I think that inspection doesn't work in my case or ASA doesn't implement inspection for static NAT.
Please, help!
10-15-2008 04:46 AM
uprade the OS to 7.2.4, there are couple bugs related to Inspect sip where the address is not modified in the transport header
07-14-2011 08:43 AM
Can you try to do a static 1-to-1 translation and test if the SIP inspection is changing the IP address.
Also if you can post the debug sip and debug sip ha I can confirm you the problem.
Regards,
Luis Sandi
.:|:.:|:.
P.S Please mark this question as answered if it has been resolved. Do rate helpful posts.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: