cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
93
Views
0
Helpful
0
Replies
Highlighted
Beginner

Site to Site VPN using RV042 units and dynamic DNS.

I am looking into a site to site vpn using the inexpensive RV042 units. And dynamic dns. Kind of messy.

I found this writeup

http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=8c6825b4d43d4886be44afde263a41aa_Configuration_of_Gateway_to_Gateway_VPN_on_RV0XX_Series_Rout.xml

Which is quite helpful, but it does not mention what if you have dynamic addresses at both ends.

I have DDNS set up from duckdns.com.

On this page about advanced setup.

http://sbkb.cisco.com/CiscoSB/ukp.aspx?pid=4&vw=1&articleid=568

It discusses using a split DNS for the connection.

I think that is what I use the DDNS on.

Can anyone verify that, or explain the config? It's kind of confusing.

Thanks

Steve Waechter

 

 

Everyone's tags (3)