Site to Site VPN with Overlapping network and other network Access..
i need to setup a site to site Tunnel to a remote site. My remote site got the network which has overlapped with one of our network(192.168.10.0/24) in my site. remote site dont need to access this network(192.168.10.0/24) in my site ,but they have to access other networks (192.168.x.0)
i have prepared the below configuration ,relevant to nat to achiev the goal. Appreciate help to verify and help to achive this...
i have attached one rough diagram also..
Mysite ------- access-list acl-httsamorocco extended permit ip 192.168.73.0 255.255.255.0 192.168.74.0 255.255.255.0 access-list nonat extended permit ip 192.168.x.0 255.255.255.0 192.168.74.0 255.255.255.0
Threat Response Basics
What is Threat Response and how can it help my organization?
What is the cost of Threat Response?
What are the deployment options for Threat Response?
Is Threat Response available outside of the United States?
Gartner has once again named Cisco a Leader in the Magic Quadrant for Network Firewalls. This distinction recognizes Cisco's ingenuity in redefining the firewall as the basis for an integrated security platform.
Find out how Cisco stands out from the comp...
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...