I am using cisco SF100-24 switch in my network. It is directly connected to my core switch. I know that this switch doesn't support command line (CLI). But i am not sure about Web GUI. I want to use this switch for multiple Vlans means i want to assign some port for Data Vlan, Some for Printer, Some for others.
Can i do this king of assignment with this switch ?
I have done the same port assignment with SG200-08 unmanaged switch. I have configured it through Web GUI but b not sure about this SF 100-24 switch.
Does this switch support GUI ? If it is then how can i access the GUI for this switch ?
ISE 2.2 Patch 10 has been released at ISE 2.2.0 Software Download since 2018-Sep-18, with the filename ise-patchbundle-22.214.171.1240-Patch10-18091119.SPA.x86_64.tar.gz.
For more info, please read Resolved Issues in Cisco ISE Version 126.96.36.1990—Cumulative ...
ISE 2.3 Patch 5 has been released at ISE 2.3.0 Software Download since 2018-Sep-17, with the filename ise-patchbundle-188.8.131.528-Patch5-18082702.SPA.x86_64.tar.gz.
For more info, please read Resolved Caveats in Cisco ISE Version 184.108.40.2068—Cumulative P...
I recently ran into an issue on ISE 2.3 Patch 5 when trying to modify a Hotspot Guest Portal that had been created in the ISE Portal Builder.
The support people with the ISEPB team gave me the answer, so I thought I'd save someone a...
The Security team is pleased to announce the Cisco Firepower Threat Defense 6.2.3 Attack Lab v1.2, available in all datacenters.
The lab is aimed at technical decision makers, security engineers and CSOs with an interest in security technology. Th...