Snmp monitoring via IPSEC Tunnel

[Capricorn]

Hi!

We have IPSec tunnel between two sites and I want to monitor the Site B ASA Interface and I have configured the snmp on cisco Asa. The issue is that I dont have any management interface and I tried snmp on both inside and outside for testing but I can see the request coming to Cisco Asa on port 161 "Build inobut UDP connection" for Otuside ...

All the interested traffic is allowed between two sites.

Monitoring server--- Site A IPSEC ------------------------ Site B IPsec Oustside Cisco Asa interface to be monitored.

I am using Inside interface to snmp pull. Inside interface contains the IPaddress 192.168.1.25.

Any help with this?

Thanks

[Seb Rupik]

Hi there,

Have you specified the snmp server on the ASA:

!
snmp-server host OUTSIDE 192.168.1.25 community <community_string>
!

cheers,

Seb.

[Capricorn]

192.168.1.25 is Cisco ASA inside IP

I have this command 

snmp-server host outside 10.120.1.2 community xxxx

10.120.1.2 is my monitoring server which is located on site A

I even tried from my machine with IP 10.120.1.40 and run the visual snmp but getting Request Time out