cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

290
Views
5
Helpful
4
Replies
Participant

SSL VPN Access from inside and outside

I recently configured an SSL VPN on my ASA v9.8 and it seems to work just fine when accessing its fqdn from outside.

I would like to have users also access the same fqdn from inside the network, but connection attempts to the same fqdn just time out.

 

On the Connection Profiles node in the ASDM, I am allowing access from both the inside and outside interfaces.

In watching the ASA logs while a connection is attempted from the inside, I do not see applicable logs being generated.

Running a Wireshark capture on the local host during connection attempts, I see SYN timeouts to the outside address of the ASA.

What am I missing?  Should this even be possible?

 

Thanks in advance for your suggestions.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: SSL VPN Access from inside and outside

For inside users the fqdn should resolve to inside interface IP rather than
outside. Although I don't understand the requirement for your scenario,
you can fix it by creating an A record for same fqdn in your internal dns
server to resolve to inside interface IP of the ASA
4 REPLIES 4
VIP Advisor

Re: SSL VPN Access from inside and outside

For inside users the fqdn should resolve to inside interface IP rather than
outside. Although I don't understand the requirement for your scenario,
you can fix it by creating an A record for same fqdn in your internal dns
server to resolve to inside interface IP of the ASA
Participant

Re: SSL VPN Access from inside and outside

Thank you Mohammed... that's perfect!

Highlighted
Beginner

Re: SSL VPN Access from inside and outside

No one wants to wait two to four weeks to unlock the bootloader. At least, they should make a "fast path" for long-term https://xender.pro/ https://discord.software/ https://omegle.onl/

Beginner

Re: SSL VPN Access from inside and outside

Hi John i have a question i configure here tunnel routers see each others but only in one side. Haw i configure routers and they see each other in all side photo_2019-01-10_16-38-37.jpg  
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.