cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
821
Views
0
Helpful
1
Replies

Support for Windows 7 Embedded OS

Amit Arora
Cisco Employee
Cisco Employee

Hi Team,

ISE posture is working fine for windows 7,8,10 desktops.

 

ISE posture is not working in Thinclients machine running with Windows Embedded 7 OS . Anyconnect Posture Module System scan  says “Operating system is not supported with Server”.

ISE 2.0 Network Component Guide says that  

https://www.cisco.com/c/en/us/td/docs/security/ise/2-0/compatibility/ise_sdt.html 

Cisco ISE does not support the Windows Embedded operating systems available from Microsoft. 

However 2.3 does not list that. 

https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/compatibility/ise_sdt.html#pgfId-123698

Would like to verify if its supported or not.

Does this limitation applies to Any-connect NAM Module also or only with Any-connect ISE Posture Module?
If its not supported is there any alternative to bring Windows Embedded 7 OS into network?

 

Thanks

Amit

 



 

1 Reply 1

hslai
Cisco Employee
Cisco Employee

As you already tested it and shown not supported, please log a doc bug to correct the info in ISE CCO doc.

AFAIK the teams have not verified AnyConnect modules on embedded Windows OS so unlikely to claim support.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: