09-26-2011 03:16 PM
Hi guys,
I just bought a Cisco/Linksys RV042 version 3 and am having trouble getting my Macbook Pro running IPSecuritas to establish a client to gateway VPN tunnel.
I get an "Error - IKE - none message must be encrypted" message in the IPSecuritas connection log. It will keep retrying which results in the same error. Eventually it just gives up.
I am pretty sure I have the settings on the router end and Macbook end of the VPN configured identically.
Here is a screenshot of the RV042 configuration page. Any input would be greatly appreciated, thanks.
09-29-2011 07:20 AM
10-31-2011 02:08 PM
i have the same problem, but now answer ... please help.
i think it is a bug.....
10-31-2011 05:15 PM
Hi Stephan,
Take a look at this guide: https://supportforums.cisco.com/docs/DOC-10266
It helped me get the VPN to work.
10-31-2011 11:47 PM
thanks, but i have now also errors.
please post your working configuration from rv042 an ipsecuritas.
thanks
stephan
11-01-2011 05:07 PM
Stephan,
The RV042 configuration is in my original post. It hasn't changed.
Here is the IPSecuritas configuration
Hope that helps.
12-27-2011 07:13 AM
Hey Harry,
were you able to solve this issue sucessfully?
I have noticed, that your config of ipSecuritas uses the "Main Mode" whereas I am always using "Agressive Mode" VPNs for Client to Gateway Setups (I think I had to due to the Cisco RV042).
Funny thing that I am experiencing here is:
VPNs IPsec <-> Cisco RV042 first generation work
VPNS IPsec <-> Cisco RV042 latest generation (newest 4.1...Firmware) does not work
IPsec is always complaining about "none message must be encrypted" and I assume that the "Phase 1" cannot be established but I have no clue anymore. (did try different setup combinations).
Thank you for any clarification whether you managed it or your workaround.
Stefan
12-27-2011 09:59 AM
Hi Stefan,
Yes I was able to establish a VPN tunnel successfully using the settings above. For me, Aggressive Mode would not work regardless of any other setting that I changed, so I set it to Main Mode. I'm still running on 4.0.4.02 firmware. Haven't tried the 4.1 firmware yet. Maybe they haven't ironed out the bugs? I can't think of much else that might help you as this would be my first time working with VPNs.
Harry
11-07-2019 10:40 AM
I realize this thread is 8 years old now, but I'm fighting with the same problem. Using the latest firmware of v4.2.3.10 It appears the original attachment containing the RV042 settings is missing. Can someone post the RV042 settings that work with this please? Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide