We recently installed AC 4.6 on a corporate laptop, but after the installation completes, TND fails and prompts the user to connect to the VPN.
While reviewing the ipconfig /all output on the laptop, I noticed there was a foreign domain name listed in the Connection-specific DNS suffix field of a disconnectedadapter (wlan in this case)... laptop was plugged into the network on the wired port. Everything else in the output looked fine.
So could this be the problem with TND on this laptop? This domain is nowhere to be found in the Windows 7 GUI network settings, however, so I cannot clear the value to test this theory.
Any thoughts? I would have expected TND to look at only the connected adapters.
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...
Threat Hunting 101
In the latest Cisco Cybersecurity report, we explore all there is to know about threat hunting and provide a how-to guide for creating a threat hunting team.
Here are some of th...
What Is Cisco Identity Services Engine?
Cisco Identity Services Engine (ISE) is an all-in-one enterprise policy control product that enables comprehensive secure wired, wireless, and Virtual Private Networking (VPN) access.
Cisco ISE offers...