05-15-2019 10:05 AM - edited 02-21-2020 09:39 PM
“webvpn install svc ftp://192.168.22.5/anyconnect-win-3.1.05160-k9.pkg seq 1" I get this error "SSLVPN Package SSL-VPN-Client (seq:1): installed %%Error: Invalid Archive"
Any ideas?How to install it?
05-15-2019 11:28 AM
Hi,
Are you trying to copy from FTP to Flash and then install? I think you need to do it in 2 steps:-
Copy the file from FTP to flash
copy ftp://username:password@192.168.22.5/anyconnect-win-3.1.05160-k9.pkg flash:
Install the AnyConnect Client
webvpn install svc flash:/webvpn/anyconnect-win-3.1.05160-k9.pkg sequence 1
HTH
05-15-2019 08:30 PM - edited 05-15-2019 08:43 PM
thank you for the reply
This is what i did:
Router#copy ftp flash
Address or name of remote host [x.x.x.x]?
Source filename [anyconnect-win-3.1.05160-webdeploy-k9.pkg]?
Destination filename [anyconnect-win-3.1.05160-webdeploy-k9.pkg]?
Accessing ftp://x.x.x.x/anyconnect-win-3.1.05160-webdeploy-k9.pkg...
Loading anyconnect-win-3.1.05160-webdeploy-k9.pkg !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 29942546/4096 bytes]
29942546 bytes copied in 67.416 secs (444146 bytes/sec)
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#webvpn install svc flash:anyconnect-win-3.1.05160-webdeploy-k9.pkg sequence 1
SSLVPN Package SSL-VPN-Client (seq:1): installed %%Error: Invalid Archive
05-16-2019 01:52 AM
Hi,
What IOS version are you running, there is this bug here....although it is using a different command to install the package file. So potentially you are either hitting this bug or the pkg file is actually invalid/corrupt.
I've not encountered an issue when installing the AC 4.x pkg file, can you download the latest version and try again please
HTH
05-16-2019 09:24 PM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: