cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7103
Views
0
Helpful
2
Replies

VPN Client Issue - Error 1722 on Windows 10

AD_
Level 1
Level 1

I have Windows 10 (OS Build 17134.1) configured with VPN client "Cisco Systems VPN Client 5.0.07.0290", on receiving error connecting to VPN repeatedly, VPN client repair action was initiated by support teams. During the installation or re-installation of the VPN client failed with error.

 

Product: Cisco Systems VPN Client 5.0.07.0290 -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.  Action CsCaExe_VAInstall, location: C:\Program Files (x86)\Cisco Systems\VPN Client\VAInst64.exe, command: nopopup i "C:\Program Files (x86)\Cisco Systems\VPN Client\Setup\CVirtA64.inf" CS_VirtA

2 Replies 2

This client is End of Life for a very long time and not supported on Windows 10. It's time to move to AnyConnect or you can also try a client like the one from Shrew-Soft: https://www.shrew.net/download/vpn They also don't mention Windows 10, but perhaps you get that running.

As Karsten has already mentioned Cisco VPN Client is end of support and you should move to AnyConnect.  That being said, there is a work-around.  If you attempt this work-around you DO SO AT YOUR OWN RISK, and be informed that this is not a supported or recommended solution.  I am providing this information as an educational reference and I do not endorse doing this outside of a lab environment.

https://www.techradar.com/how-to/how-to-install-the-cisco-vpn-client-in-windows-10

 

--
Please remember to select a correct answer and rate helpful posts
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: