VPN Client v5 Win/Mac Connected but Can't reach LAN

[williesantiago89]

Hi Mentors,

We're running vpn client using Cisco 1921. Windows and Mac gets connected but can't ping LAN. The secured routes in Windows vpnc only have local pool addresses all with a /32 mask. I believe it should have x.x.x.0/24 network of LAN. No issues using Linux box with any credentials used.

Your advice are highly appreciated. 

Thanks, God bless.

Kind regards,

Will

[Kamal Malhotra]

The secured routes must contain the router's private network. Please modify your split acl to include it. Once you add that, the client should be able to access the network.

Regards,

Kamal

Note: Please mark answers if they are helpful.

[williesantiago89]

Hi Sir,

Thanks a lot for the help. Already done that Sir. In fact the vpn users address are same with the local lan. The acl also gives all-access to vpn users to the local lan. Interestingly, only windows boxes had issues (7 and 8). Looking at the secured routes, it has the following: 192.168.1.101 /32, 192.168.1.102/32... 192.168.1.110/32 instead of a 192.168.1.0/24. Linux and mac are all good.

Please advice.

[Kamal Malhotra]

By 'local lan' do you mean the network behind the router or the LAN local to the client? Would be able to share the config?

[williesantiago89]

Hi Sir,

I mean lan behind the router. The work around in some win 8.1 is to update dne that works with citrix. On the win 7 just clicking 'allow local lan' worked. On another win 8.1 it worked perfectly fine without any dne update.

Thank you very much Sir for taking time. Much appreciated! Till next time.

Thank you and God bless.