cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
222
Views
5
Helpful
2
Replies
Beginner

VPN connection

Hi Dudes,

i have 2 pix 506e , when i am trying to establish vpn connection between 2 pix's

it is not happenig .

diagram

192.168.2.0------>pix 1 ----crosscable-----pix 2 <-------------192.168.3.0

192.168.10.0

i have no idea whatz happening between the two.

i can ping from one pix to other's outside interface and viceversa

i have attached my config.

can anybody advice me on what iam missing in my config

regds,

rajesh

2 REPLIES 2
Highlighted
Beginner

Re: VPN connection

Rajesh,

Looks like you're missing the match clause in your pix 1 configuration:

crypto map transam 1 match address 101

In order for an IPSEC tunnel to form, the ACLs on each peer must be identical - the match clause binds the ACL to the crypto map

So currently your ACLs don't match and therefore no tunnel! :)

Hope this helps,

Mike

Rising star

Re: VPN connection

I also had a quick look at this and agree with Mike that you don't have 'crypto map transam match address 101' on pix 1

Jay