cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3657
Views
0
Helpful
2
Replies
Highlighted
Collaborator

VPN From Cisco Phone

I'm trying to get the phone VPN function working from a Cisco 7965 phone.

I can connect fine to the SSL VPN via a normal PC.

When I try from a phone, it tries to connect and returns with:

"VPN Authentication Failed"

yet, when I look on the ASA with "sh vpn-sessiondb anyconnect" I can see the phone has connected fine:

Username     : fred                  Index        : 17

Public IP    :  x.x.x.x

Protocol     : AnyConnect-Parent

License      : AnyConnect Premium, AnyConnect for Cisco VPN Phone

Encryption   : AES128                 Hashing      : SHA1

Bytes Tx     : 2417                   Bytes Rx     : 676

Group Policy : SSLClientPolicy        Tunnel Group : SSLClientProfile

Login Time   : 15:05:53 GMT/BDT Fri Aug 19 2011

Duration     : 0h:00m:38s

Inactivity   : 0h:00m:08s

NAC Result   : Unknown

VLAN Mapping : N/A                    VLAN         : none

Doing a "debug webvpn anyconnect 255", at the end shows:

CSTP state = CONNECTED

Any suggestions ?

Thanks,

GTG

Please rate all helpful posts.
Everyone's tags (4)
2 REPLIES 2
Beginner

VPN From Cisco Phone

Hi GTG,

What you are facing is really weired. Please go through the following doc and see if your phone is configured properly:-

https://supportforums.cisco.com/docs/DOC-9124

Please keep us posted.

Regards,

Sian

Collaborator

VPN From Cisco Phone

I found the problem: DTLS wasn't setup & working.

The "VPN Authentication Failed" message on the phone was a red-herring. (Gotta love useful error messages...)

GTG

Please rate all helpful posts.