05-20-2011 06:42 AM
05-26-2011 10:10 AM
Hi Mikael,
Not sure I fully understand your request but lets give it a try.
You indicate that you need to stablish a VPN tunnel between your company and partner . It looks to me that your partner requested that you communicate with them through the tunnel with a public IP instead of private sort of like PATing your private network to a public IP so that the far end only sees that public IP for their incoming connections from you ? if this is so sure it is posible , the traffic will only be in one direction meaning that you will be the initiator only, you can acomplish this by using ASA code feature called Policy NAT, you NAT your internal traffic based on their destination IP address or network .
Here is an example link explaining this feature and how it can be used based on various condictions .
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_overview.html#wp1088419
I will proceed with an example but please let me know if I have missunderstood your post.
Regards
05-27-2011 06:08 AM
thank you and sorry for my english.
i think that you understand but the traffic will not only be in one direction
The request (http, ftp, ...) is on entrance and exiting of my private network. My partner must use or filtred public ip only.
I study your response and link.
Thanks.
Mick.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: