cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

261
Views
0
Helpful
0
Replies
Highlighted
Beginner

VPN Setup on Firepower 1010

I have recently replaced my ASA-5506X with a Firepower 1010.  I had Microsoft PPTP pass through set up on the ASA, but cannot get it running on the Firepower.

 

I have tried to configure the VPN Client in FDM, but it says I cannot specify an interface since I have my internal Ethernet connections routed in a bridge group.  My guess is I had configured that incorrectly.  My current configuration:

Ethernet 1/1 : Outside

Ethernet 1/2 - 1/8:  Inside bridge group

 

I have only port 2 connected internally.

 

Questions:

1.  Does anybody have a script / article / etc. to configure PPTP to a Microsoft RRAS server?  It was working in my ASA.

 

2.  I believe item 1 is not as secure (I think), so do I need to remove the bridge group in order to identify an interface for connecting via VPN?  What is the best article(s) for configuring VPN through FDM?

 

3.  I already use Any Connect to connect to our hosting provider.  Am I able to connect to both locations simultaneously?

Thanks for your help!

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here