I have recently replaced my ASA-5506X with a Firepower 1010. I had Microsoft PPTP pass through set up on the ASA, but cannot get it running on the Firepower.
I have tried to configure the VPN Client in FDM, but it says I cannot specify an interface since I have my internal Ethernet connections routed in a bridge group. My guess is I had configured that incorrectly. My current configuration:
Ethernet 1/1 : Outside
Ethernet 1/2 - 1/8: Inside bridge group
I have only port 2 connected internally.
1. Does anybody have a script / article / etc. to configure PPTP to a Microsoft RRAS server? It was working in my ASA.
2. I believe item 1 is not as secure (I think), so do I need to remove the bridge group in order to identify an interface for connecting via VPN? What is the best article(s) for configuring VPN through FDM?
3. I already use Any Connect to connect to our hosting provider. Am I able to connect to both locations simultaneously?
ProblemTaking a snapshot of ISE virtual machines is not supported but it still happens occasionally due to administrators taking a snapshot manually or an integrated technology that automatically takes snapshots to back up VMs. When taking a snapsho...
Hi all, Is it available on Stealthwatch 7 Client or web interface the ability to import the Netflow Exporters names? I found only the possibility to configure manually the name of each Netflow Exporter, but not a bulk configuration.
User Experience Enhancements
As part of Cisco Customer Experience program, we are working towards a more uniform user experience and terminology harmonization. This program runs across all Cisco security products.
We are ali...
Join us on Thursday, October 10 at 10 am PT to meet the CEO and Founder of Cisco's most recent security investment.
In today’s cybersecurity arms race, how does Cisco stay one step ahead in the battle against attackers? One key strategy is keeping tabs on...