cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
574
Views
0
Helpful
3
Replies

Vpn Site to Site Password on Phase 1

Daniel Barbosa
Level 1
Level 1

Hi Guys,

Does anyone have any sample configuration showing the Phase 1 on VPN  Site to Site with password?

I'm using 5515 ios 9.1(2)

Many tks,

Daniel

 

3 Replies 3

rizwanr74
Level 7
Level 7

"Does anyone have any sample configuration showing the Phase 1 on VPN  Site to Site with password?"

 

Well if you want to see what password has been configured on the given tunnel, save your running configuration via a TFTP.  When configuration is saved open it via word-pad, you will see the password in it.

 

If you are asking what phase one is comprise of, it is different question altogether.

 

thanks

 

 

 

Puneesh Chhabra
Cisco Employee
Cisco Employee

crypto ikev1 policy 1

  encryption aes

  hash sha

  authentication pre-shared

  group 2

 

tunnel-group x.x.x.x  type ipsec-l2l

tunnel-group x.x.x.x ipsec-attributes

ikev1 pre-shared key xxxx

 

If you want to view the key after configuration, you can use  "more system:running-config | be tunnel-group"

 

Regards,

Puneesh

Please rate helpful posts

Hi Puneesh,

 

 

I don't think this command (more system:running-config | be tunnel-group) is available on version 9.1.5.

Any idea what would be an alternative command for this?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: