I have setup an asa 5505 with multiple subnets (plus licence)
and a vpn tunnel (ipsec) betwen this and an other asa on a second branch office (multiple vlans)
now I needed to route only two vlans from the first site to reach some of the second branch networks
let's call them
the tunnelis ok From A to CDE
but from B to CDE won't come up
pinging is unsuccessful as well as all other traffic
the connection profile is setup to have both A and B as local networks
and A and B by the moment share the same access rules configuration,
logs show firewall 1 let pass and build connections, without denies, but remote firewall does not receive a single packet fron the source ip from netywork B
Solved! Go to Solution.
yesterday I found the issue, only network A was in the nat Rules while B was not...
so I assume you are right
however thank you very much !!