VPN Tunnel only seems to work at one end

[Natalia Woloseckyj]

Hi All,

I've configured an IPSEC VPN between an ASA and PIX with the exact same configuration, and I can see phase 1/2 up.

However from the PIX end I am able to telnet to the remote site to other network devices, but from the ASA end, I am unsuccessful.

Could anyone advise why this could be?

Many Thanks,

Natalia

[Julio Carvajal]

Hello Natalia,

Please check and compare the NAT configuration on both sides and the crypto ACL's.

You can post the configuration for further analisys.

Julio