I just want to know Why I m not able open router in webpage with SDM client software.
Just find the attach file here..
My router IP add : 192.168.10.1/24 ( Fa 0/0 ) n cloud is connected to my loop back interface with 192.168.10.50/24
I m albe to ping my loop back as well as Router IP address.
but when I tring to open my router in webpage through SDM in IE,Firefox ,or google crome ..it's showing waitng / loading ......loading ...
Can u tell me where I did mistake ???
I configured router with CMD's:
ip http server
username cisco pass cisco
In SDM client software :
Device ID orh hostname : 192.168.10.1 - connect.. showing loading ....loading...
tried on all K9 IOS :
Could any one please help me regarding this issue...?
Thank in advance,
I was able to use SDM and ASDM with GNS3. I used IE and not firefox.
You have to enable http on the router and connect with SDM.
If it's not working, try to connect with IE.
Thanks for your reply....
As I mentioned I was not able open by using IE v8....
Could you please tell me which IOS you used for SDM...???
Means Entire - IOS Name ...
I have tested and it's working fine for me. I am using bridged connection between the cloud and the f0/0 of the router in GNS3. The interface works on internet explorer.
Here is the config and ios ver.
Cisco IOS Software, 3600 Software (C3640-A3JS-M), Version 12.4(25c), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 12-Feb-10 00:48 by prod_rel_team
ROM: ROMMON Emulation Microcode
ROM: 3600 Software (C3640-A3JS-M), Version 12.4(25c), RELEASE SOFTWARE (fc2)
Router uptime is 13 minutes
System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
System image file is "tftp://255.255.255.255/unknown"
Cisco 3640 (R4700) processor (revision 0xFF) with 124928K/6144K bytes of memory.
Processor board ID 00000000
R4700 CPU at 100MHz, Implementation 33, Rev 1.2
1 FastEthernet interface
DRAM configuration is 64 bits wide with parity enabled.
125K bytes of NVRAM.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Current configuration : 591 bytes
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no aaa new-model
memory-size iomem 5
username dorin privilege 15 secret 5 $1$q2K6$bRFAKeal.T/4lyawyOouC.
ip address 192.168.2.150 255.255.255.0
ip http server
ip http authentication local
ip forward-protocol nd
line con 0
line aux 0
line vty 0 4