08-22-2012 02:06 PM
Hi.
I have a Cisco 881 ISR (CISCO881-SEC-K9) and have the advanced security license installed and enabled/active and in use (see screenshot). However, the isakmp crypto module is not available.
cisco#crypto ?
gdoi GDOI related commands
ipsec IPSec
key Key related commands.
pki Public Key
Here's my output of "show version"
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.0(1)M8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 16-Feb-12 02:58 by prod_rel_team
ROM: System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
cisco uptime is 11 minutes
System returned to ROM by reload at 13:47:55 PCTime Wed Aug 22 2012
System restarted at 13:48:27 PCTime Wed Aug 22 2012
System image file is "flash:c880data-universalk9-mz.150-1.M8.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 881 (MPC8300) processor (revision 1.0) with 236544K/25600K bytes of memory.
Processor board ID FTX1624812T
5 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
256K bytes of non-volatile configuration memory.
125440K bytes of ATA CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO881-SEC-K9 FTX1624812T
License Information for 'c880-data'
License Level: advsecurity Type: Permanent
Next reboot license Level: advsecurity
Configuration register is 0x2102
Solved! Go to Solution.
08-22-2012 11:17 PM
What kind of module are you missing? Or are you missing the command "crypto isakmp" which is not available in your printout?
If it's just the command, then go to conf-mode where you can configure isakmp and find the "crypto isakmp ..." commands.
Sent from Cisco Technical Support iPad App
08-22-2012 11:17 PM
What kind of module are you missing? Or are you missing the command "crypto isakmp" which is not available in your printout?
If it's just the command, then go to conf-mode where you can configure isakmp and find the "crypto isakmp ..." commands.
Sent from Cisco Technical Support iPad App
08-23-2012 11:10 AM
Hi Karsten.
User error, just as I figured. I needed to be in "config" mode to do the setup, and it's working now (well, mostly, I have a routing issue, but that's another thing completely).
Todd
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide