Accessing windows share on PIX to PIX VPN

[cbayadmin_mum]

I have set up a site to site (pix to pix ) vpn succesfully , Have allowed ip communication for both side networks .

All is working fine expect i am not able to browse windows share thru VPN , i tired giving \\ip address and also put the ip mapping in lmhost and host file ..still its not working .

I am using pix 515E version 6.3 at both ends ..

Can any body give me a hint

[abatson]

When you say you're allowing "IP" through, does this mean you're allowing all TCP and all UDP ports thru? This should be enough to allow a windows drive mapping to occur. TCP42 must be open for WINS registration. Also beware that there's a command that logically puts your VPN tunnel inside, or outside the access-list. In other words, do you trust the traffic in your VPN enough to not require it to pass thru any access lists on the PIX? If you've got TCP and UDP wide open, and still not able to map, using \\10.10.10.10\sharename, check to see if the VPN traffic is / is not moving thru an access list.