Solved: AIM-VPN/EP MODULE from C2621 in C1841 ???

Didier1966 · ‎02-08-2011

Hello,

For some test in my lab , I ordered on e-bay a AIM-VPN board , they guy told me that it work in a C1841.

When I compare to the one I have in my C2621 , they look equal.

On both pcb I can read : CN6I280AAA

When I put it in I get this :

Smart Init is enabled

smart init is sizing iomem

ID MEMORY_REQ TYPE

0X003AA110 public buffer pools

0X00211000 public particle pools

0002A0 UNKNOWN AIM

0X00020000 Crypto module pools

0X000021B8 Onboard USB

Do you thing the card is working ?

Thank you for your help.

Best Regards,

Didier

Marcin Latosiewicz · ‎02-08-2011

Didier,

Can you please attach output of:

- show ver

- show diag

- show inv

- show logg (if taken after bootup)

- show crypto eli

- show crypto engine config

Let's see what's the name of the beast ;-)

Marcin

View solution in original post

Marcin Latosiewicz · ‎02-09-2011

Didier,

JAB060509NG serial number belongs to a device which is AIM-VPN/EP= (surprise, surprise ;-])

By checking here:
http://www.cisco.com/en/US/docs/ios/12_2/12_2z/12_2zj/feature/guide/gtaimvpn.html

and

http://www.cisco.com/en/US/products/hw/routers/ps259/prod_eol_notice09186a008032d48c.html

It looks to me like that AIM module is not going to work with 1841.

Here are the modules compatible with 1841:

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd80516d81_ps5855_Products_Q_and_A_Item.html

Marcin

View solution in original post

Marcin Latosiewicz · ‎02-08-2011

Didier,

Can you please attach output of:

- show ver

- show diag

- show inv

- show logg (if taken after bootup)

- show crypto eli

- show crypto engine config

Let's see what's the name of the beast ;-)

Marcin

Didier1966 · ‎02-09-2011

Hi Marcin,

Thank you for this feed-back , in the log file I can see this , this clear :

*Feb 8 18:45:50.043: %AIM-2-AIMUNSUPP: AIM type 0x2A0 is not supported by this platform.

Thank You again for your Help

ROUTER1841#sh ver

Cisco IOS Software, 1841 Software (C1841-ADVSECURITYK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Fri 19-Jun-09 14:00 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

ROUTER1841 uptime is 16 hours, 2 minutes

System returned to ROM by power-on

System restarted at 19:47:35 gmt+1 Tue Feb 8 2011

System image file is "flash:c1841-advsecurityk9-mz.124-24.T1.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 1841 (revision 7.0) with 355328K/37888K bytes of memory.

Processor board ID FHK1314219J

6 FastEthernet interfaces

1 Virtual Private Network (VPN) Module

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

990360K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x3922

ROUTER1841#sh diag

Slot 0:

C1841 2FE 2SLOT Mainboard Port adapter, 6 ports

Port adapter is analyzed

Port adapter insertion time 16:03:27 ago

EEPROM contents at hardware discovery:

Chassis MAC Address : 0024.c4eb.6600

MAC Address block size : 34

PCB Serial Number : FOC131237J0

Hardware Revision : 7.0

Part Number : 73-8191-08

Board Revision : E0

Top Assy. Part Number : 800-23434-06

Deviation Number : 0

Fab Version : 04

CLEI Code : IPM7W00CRA

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : CISCO1841

Version Identifier : V05

Processor type : 86

Chassis Serial Number : FHK1314219J

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF C3 06 00 24 C4 EB 66 00 43 00 22 C1 8B 46

0x10: 4F 43 31 33 31 32 33 37 4A 30 40 04 1B 41 07 00

0x20: 82 49 1F FF 08 42 45 30 C0 46 03 20 00 5B 8A 06

0x30: 88 00 00 00 00 02 04 C6 8A 49 50 4D 37 57 30 30

0x40: 43 52 41 03 00 81 00 00 00 00 04 00 CB 89 43 49

0x50: 53 43 4F 31 38 34 31 89 56 30 35 20 D9 02 C1 40

0x60: 09 86 C2 8B 46 48 4B 31 33 31 34 32 31 39 4A FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x100: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x110: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x140: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC/HWIC Slot 0:

4 Port FE Switch

Base MAC Address : 0019.30f7.f24e

MAC Address block size : 4

PCB Serial Number : FOC1105288H

Hardware Revision : 6.0

Part Number : 73-8474-06

Board Revision : A0

Top Assy. Part Number : 800-24193-02

Deviation Number : 0

Fab Version : 05

CLEI Code : IPUIA00RAA

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : HWIC-4ESW

Version Identifier : V01

Connector Type : 01

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF CF 06 00 19 30 F7 F2 4E 43 00 04 C1 8B 46

0x10: 4F 43 31 31 30 35 32 38 38 48 40 00 56 41 06 00

0x20: 82 49 21 1A 06 42 41 30 C0 46 03 20 00 5E 81 02

0x30: 88 00 00 00 00 02 05 C6 8A 49 50 55 49 41 30 30

0x40: 52 41 41 03 00 81 00 00 00 00 04 00 CB 89 48 57

0x50: 49 43 2D 34 45 53 57 89 56 30 31 20 D9 02 C1 40

0x60: 05 01 FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

AIM Module in slot: 0

Hardware Revision : 1.0

Top Assy. Part Number : 800-15369-02

Board Revision : C0

Deviation Number : 0-0

Fab Version : 02

PCB Serial Number : JAB060509NG

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Calibration Data : Minimum: -1 dBmV, Maximum: -1 dBmV

Calibration values : 0xFFFF 0xFFFF 0xFFFF 0xFFFF 0xFFFF 0xFFFF

0xFFFF 0xFFFF 0xFFFF 0xFFFF 0xFFFF 0xFFFF

0xFFFF 0xFF00 0x0000 0x0000 0x0000 0x0060

0x7BD8 0x2C60 0xD3B4 0x9000 0x0000 0x0000

0x0000 0x0062 0xB02A 0x8865 0xFA5D 0x5000

0x0000 0x0000 0x0000 0x0063 0xBE00 0x0060

0x3659 0xC000 0x0000 0x0000 0x0000 0x0000

0x0002 0xA000 0x0000 0x0064 0xBDC5 0x0864

0x0072 0x8863 0xBE00 0x0064 0xBDC5 0x1400

0x0000 0x0000 0x0000 0x0160 0x0716 0x4860

0x0715 0x8800 0x0000 0x0000 0x0000 0x0100

0x0000 0x0029 0x0000 0x1264 0x799E 0x1065

0xEDB9 0x5400 0x0000 0x0A62 0xF900 0x0060

0xD738 0xB860 0xD738 0x3C65 0xFA5D 0xA800

0x5ECC 0x9865 0xFA5D 0xC000 0x0000 0x0065

0xEE50 0x8461 0xE4E4 0x2463 0xEE00 0x0065

0x175B 0x2400 0x0000 0xEC65 0xEDB9 0x5462

0x4B50 0x7400 0x0000 0x0165 0x13C6 0x4000

0x0000 0x0100 0x0000 0x0062 0x4B50 0x6C00

0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

0x0000 0x0065 0xEDCF 0xDC00 0x0000 0x0065

0x13C6 0x4000 0x0000 0x0165 0x174F 0x0465

0xEDB9 0x5400 0x0000 0x0000 0x0000 0x0000

0x0000 0x0163 0xEE00 0x0064 0x1B00 0x0000

0x0000 0x0060 0xD998 0xF065 0xC2B4 0x1C65

0xFA5E 0x8866 0x50B7 0x2000 0x0000 0xEC00

0x0000 0x0162 0xFA9D 0x7465 0xEDCC 0x2C00

0x0000 0x060D 0x0008 0x0066 0x50B7 0x2065

0xEE3B 0x9065 0x13C6 0x4000 0x0000 0x0100

0x0000 0x0663 0xEE00 0x0000 0x0000 0x0000

0x0000 0x0062 0x4C3A 0xA462 0x4C3A 0xF863

0x597E 0xB065 0x13C6 0x4066 0x1330 0x4C00

0x0000 0x01FF 0xFFFF 0xFF65 0x175A 0x1562

0x4C9F 0xC863 0xEE00 0x0000 0x0000 0x0300

0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

0x0000 0x0663 0xEE00 0x0000 0x0000 0x0000

0x0000 0x0062 0x4CA5 0x6400 0x0000 0x0063

0x5990 0xE063 0xEE00

FRU Part Number :

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 02 A0 41 01 00 C0 46 03 20 00 3C 09 02

0x10: 42 43 30 80 00 00 00 00 02 02 C1 8B 4A 41 42 30

0x20: 36 30 35 30 39 4E 47 03 00 81 00 00 00 00 04 00

0x30: C8 09 FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

ROUTER1841#

ROUTER1841#sh inventory

NAME: "chassis", DESCR: "1841 chassis"

PID: CISCO1841 , VID: V05 , SN: FHK1314219J

NAME: "4 Port HWIC on slot 0", DESCR: "4 Port FE Switch"

PID: HWIC-4ESW , VID: V01 , SN: FOC1105288H

ROUTER1841#

ROUTER1841#sh inventory

NAME: "chassis", DESCR: "1841 chassis"

PID: CISCO1841 , VID: V05 , SN: FHK1314219J

NAME: "4 Port HWIC on slot 0", DESCR: "4 Port FE Switch"

PID: HWIC-4ESW , VID: V01 , SN: FOC1105288H

ROUTER1841#sh logg

Syslog logging: enabled (0 messages dropped, 3 messages rate-limited,

0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.

Console logging: level debugging, 44 messages logged, xml disabled,

filtering disabled

Monitor logging: level debugging, 0 messages logged, xml disabled,

filtering disabled

Buffer logging: level notifications, 33 messages logged, xml disabled,

filtering disabled

Logging Exception size (4096 bytes)

Count and timestamp logging messages: disabled

Persistent logging: disabled

No active filter modules.

ESM: 0 messages dropped

Trap logging: level informational, 50 message lines logged

Log Buffer (4096 bytes):

*Feb 8 18:45:50.019: %ESWMRVL_FLTMG-5-NOTICE: Notice: FPGA Rev 0x71

*Feb 8 18:45:50.043: %AIM-2-AIMUNSUPP: AIM type 0x2A0 is not supported by this platform.

*Feb 8 18:46:17.535: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down

*Feb 8 18:46:17.651: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down

*Feb 8 18:46:18.263: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

*Feb 8 18:46:20.323: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up

*Feb 8 18:46:20.323: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down

*Feb 8 18:46:20.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, changed state to up

*Feb 8 18:46:21.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

*Feb 8 18:46:33.247: %SYS-5-CONFIG_I: Configured from memory by console

*Feb 8 18:46:33.935: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to down

*Feb 8 18:46:33.935: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan20, changed state to down

*Feb 8 18:46:33.935: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan30, changed state to down

*Feb 8 18:46:33.935: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan245, changed state to down

*Feb 8 18:46:34.447: %SYS-5-RESTART: System restarted --

Cisco IOS Software, 1841 Software (C1841-ADVSECURITYK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Fri 19-Jun-09 14:00 by prod_rel_team

*Feb 8 18:46:34.455: %SNMP-5-COLDSTART: SNMP agent on host ROUTER1841 is undergoing a cold start

*Feb 8 18:46:34.511: %SSH-5-ENABLED: SSH 2.0 has been enabled

*Feb 8 18:46:34.663: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

*Feb 8 18:46:34.775: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down

*Feb 8 18:46:35.539: %LINK-3-UPDOWN: Interface FastEthernet0/0/2, changed state to up

*Feb 8 18:46:35.539: %LINK-3-UPDOWN: Interface FastEthernet0/0/1, changed state to up

*Feb 8 18:46:35.539: %LINK-3-UPDOWN: Interface FastEthernet0/0/0, changed state to up

*Feb 8 18:46:35.711: %DTP-5-TRUNKPORTON: Port Fa0/0/3 has become dot1q trunk

*Feb 8 18:46:36.531: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up

*Feb 8 18:46:36.531: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to up

*Feb 8 18:46:36.531: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan20, changed state to up

*Feb 8 18:46:36.531: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan30, changed state to up

*Feb 8 18:46:36.535: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan245, changed state to up

*Feb 8 18:46:36.539: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0/3, changed state to up

*Feb 8 18:46:36.539: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0/2, changed state to down

*Feb 8 18:46:36.539: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0/1, changed state to down

*Feb 8 18:46:36.539: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0/0, changed state to down

*Feb 8 18:46:43.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up

ROUTER1841#

ROUTER1841#sh crypto eli

Hardware Encryption : ACTIVE

Number of hardware crypto engines = 1

CryptoEngine FPGA details: state = Active

Capability : IPPCP, DES, 3DES, AES, IPv6, GDOI, FAILCLOSE

IPSec-Session : 0 active, 300 max, 0 failed

ROUTER1841#

ROUTER1841#sh crypto engine configuration

crypto engine name: Virtual Private Network (VPN) Module

crypto engine type: hardware

State: Enabled

Location: onboard 0

Product Name: Onboard-VPN

HW Version: 1.0

Compression: Yes

DES: Yes

3 DES: Yes

AES CBC: Yes (128,192,256)

AES CNTR: No

Maximum buffer length: 4096

Maximum DH index: 0000

Maximum SA index: 0000

Maximum Flow index: 0300

Maximum RSA key size: 0000

crypto lib version: 20.0.0

crypto engine in slot: 0

platform: VPN hardware accelerator

crypto lib version: 20.0.0

ROUTER1841#

Marcin Latosiewicz · ‎02-09-2011

Didier,

JAB060509NG serial number belongs to a device which is AIM-VPN/EP= (surprise, surprise ;-])

By checking here:
http://www.cisco.com/en/US/docs/ios/12_2/12_2z/12_2zj/feature/guide/gtaimvpn.html

and

http://www.cisco.com/en/US/products/hw/routers/ps259/prod_eol_notice09186a008032d48c.html

It looks to me like that AIM module is not going to work with 1841.

Here are the modules compatible with 1841:

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd80516d81_ps5855_Products_Q_and_A_Item.html

Marcin