Everything is configured as written in the config guides. I have also tried configuring AnyConnect through ASDM, but no success. I had a previously working config for ASA 8.0 and older AnyConnect version, but that is not working either.
I get the following error message while debuging on the ASA:
Validating address: 0.0.0.0 CSTP state = WAIT_FOR_ADDRESS webvpn_cstp_accept_address: 192.168.10.1/255.255.255.0 webvpn_cstp_accept_ipv6_address: No IPv6 Address CSTP state = HAVE_ADDRESS SVC: NP setup np_svc_create_session(0x36000, 0xD5291340, TRUE) webvpn_svc_np_setup SVC ACL Name: NULL SVC ACL ID: -1 SVC ACL ID: -1 vpn_put_uauth success! SVC IPv6 ACL Name: NULL SVC IPv6 ACL ID: -1 SVC: adding to sessmgmt SVC: Sending response Unable to initiate NAC, NAC might not be enabled or invalid policy CSTP state = CONNECTED webvpn_rx_data_cstp webvpn_rx_data_cstp: got message SVC message: t/s=3/16: Failed to fully establish a connection to the secure gateway (proxy authentication, handshake, bad cert, etc.).
Community Live Event Video
Are you ready to level up your security? Learn more about how Cisco SecureX can help you simplify your security and maximize operational efficiency.
This event talks about Cisco SecureX, its benefits, features, and usage. Th...
Hi all,I cannot understand why is something working very well they create a way to complicate things in Cisco ASA OS. I have a rule :object network LOCAL_ADRESS1 host 192.168.20.12 nat (VLAN20,outside) source static LOCAL_ADRESS1 interface&...
It is our pleasure to officially announce the finalists in the 2021 IT Blog Awards. We are now looking to our amazing tech community to check out the amazing line up of bloggers, vloggers and podcasters. Make sure to vote for your favorites...
Community Live Event Slides
This event talks about Cisco SecureX, its benefits, features, and usage. The session includes sample use cases and live demonstrations.
Cisco expert Luis Silva talks about how this solution can integrate Cisco technology and ...
Hello All, Recently I got an opportunity to perform POC with Cisco ISE (2.7 Patch 4) and Aruba Wireless AP (IAP) to perform 802.1x EAP-FAST (machine + user) authentication followed by Posture Assessment on Windows 10 Machines (installed with AnyConnect 4....