07-21-2010 08:56 AM - edited 02-21-2020 04:44 PM
Hi,
while testing AnyConnect Version 2.5.0217 we see the following issue with IPv6 enabled:
When the tunnel is brought up, the default route for the tunnel interface cscotun0 ist not set. So there is no IPv6 traffic over the tunnel possible. Manual adding of the route works, but is not what we want out user to do ervery time they log on. In Version 2.4.1012 everything works as expected.
Anybody out there to confirm this?
Compared to Release 2.4.1012 the routing table (ip -6 route) misses the followinf entry:
default dev cscotun0 metric 1 mtu 1350 advmss 1290 hoplimit 0
regards,
Markus
Nachricht geändert durch Markus Meschederu: Routing table entry added
08-25-2010 09:20 AM
Bug still in 2.5.1025 :-(
10-29-2010 03:37 AM
fixed :-) (update 2011-01-26: if you upgrade to 3.0.0629)
01-25-2011 01:39 AM
Did you found any solution? I have the same problem in 2.5.2
014.
Thank you, Jiri Grygarek
01-25-2011 06:37 AM
Jiri,
if you are able to use the latest 3.x client you will be fine. This resolved my problem. Version 3 is available for download on CCO. I can reproduce your problem with the missing default route in Version 2.5.0217. Otherwise you have to add the default route manually or use 2.4.1012.
regards,
Markus
01-26-2011 05:40 AM
I am having the same problem on OSX with 2.5.2017.. no IPv6 default..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide