Anyconnect 4.X Using ISE device only

[amit babar]

Hello All,

Is it possible to built Anyconnect 4.x set up using ISE only?.

If yes is there any license requirement and how.

Thanks  in advance

[Karsten Iwen]

What do you mean with "using ISE only"?

In general: For using AnyConnect you need the right license. If you just want to use the VPN-component, the PLUS-License is enough. Here it doesn't matter if you authenticate against the local ASA-database, the ISE or a different server.

If you want to use AnyConnect for posturing the client before the connection is done, the PLUS-license is not enough. Here you need the APEX license (for both AnyConnect and ISE).

[amit babar]

Thank you Karsten for reply.                      ISE only means is it possible to use ISE as a VPN gateway instead of ASA or router. I want to use Cisco anyconnect 4.x 

[Karsten Iwen]

No, the ISE is a AAA-server and can't act as a VPN-Gateway. For that you still have to use a different device.