cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
4999
Views
0
Helpful
2
Replies
Highlighted
Beginner

Anyconnect client auto-download & installed from webVPN(clientless)

I don't know what has been missed but once I sign on the webvpn (clientless), the VPN client downloader pops up and starts to install the anyconnect client on the remote PC.

I don't want this. I have one group that only has clientless access and another group can have both. But now,either group sign on the webvpn, the download starts.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hey,

Have you checked the tunneling protocol that each of the groups are using?

Also have you checked the login settings for the SSL client also, you can go to the group-policy you are using and then advance, then go to SSL VPN client, then login settings, there check the default post login as where it's pointing!

HTH,

Mo.

View solution in original post

2 REPLIES 2
Highlighted

Hey,

Have you checked the tunneling protocol that each of the groups are using?

Also have you checked the login settings for the SSL client also, you can go to the group-policy you are using and then advance, then go to SSL VPN client, then login settings, there check the default post login as where it's pointing!

HTH,

Mo.

View solution in original post

Highlighted

Thanks, Mohammad, I did have one group set to only SVC. add webvpn on and fixed the problem.

But I still think Cisco should have some options to control this.

Content for Community-Ad