AnyConnect not connecting

[sevenseas1]

Created a new cisco anyconnect profile, in fact none of the profiles has ever connected. My question is the selfcert fqdn must this match the host name of the ASA 5510?Must the Https: url match this as well?

Also when applying the profile to the outside interface public ip address should you be able to use this in the https and still be able to connect?

IOS 9.1(6)

ASDm 7.5(1)

Any cli diagnostics I can run to check if the request actually hits the firewall?

All help appreciated

[nspasov]

1. Did you obtain a publicly signed certificate for the ASA or generate a self-signed one? 

2. What error message do you get when you try to connect?

Thank you for rating helpful posts!

[sevenseas1]

1: self assigned cert will buy a public when I get it to work properly

2: I don't connect at all that my problem

[Rohan Padwal]

Hi 

Please follow the below link

 http://www.cisco.com/image/gif/paws/99756/asa8.x_anyconnect_vpn.pdf

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/99756-asa8-x-anyconnect-vpn.html

are you getting the cert error on any connect when you try to connect ??

#Rohan