09-19-2016 02:41 PM - edited 02-21-2020 08:58 PM
Hello,
I'm looking for a confirmation regarding an existing ASA 5510 with license bellow. is the existing activated license can provide more than 2 connected users using anyconnect with tunnel mode for network access. thanks for feedback.
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1599 MHz,
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xfff00000, 1024KB
Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode : CNLite-MC-SSLm-PLUS-2_05
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.09
Number of accelerators: 1
0: Ext: Ethernet0/0 : address is 001d.7066.7b8a, irq 9
1: Ext: Ethernet0/1 : address is 001d.7066.7b8b, irq 9
2: Ext: Ethernet0/2 : address is 001d.7066.7b8c, irq 9
3: Ext: Ethernet0/3 : address is 001d.7066.7b8d, irq 9
4: Ext: Management0/0 : address is 001d.7066.7b89, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Disabled perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Security Contexts : 0 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
Cluster : Disabled perpetual
09-19-2016 03:22 PM
Hi Sindibade 78,
That is correct, you have a basic license that allows 2 AnyConnect clients connected simultaneously.
Hope this info helps!!
Rate if helps you!!
-JP-
09-19-2016 03:25 PM
My question is to confirm more than 2 vpn tunnels via anyconnect? Thanks.
09-19-2016 06:54 PM
We don't use the term "vpn tunnels".
Your license will restrict you to no more than two simultaneous AnyConnect-based remote access VPN user sessions.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: