ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
19535
Views
0
Helpful
18
Replies
Highlighted
Beginner

Re: AnyConnect VPN full tunnel with internet access

Hi Naman,

Thanks for your input, I tried readding the virtual-template under the webvpn context, however, no difference.

Basically both the virtual-template as well as the virtual-access stay down while a user is connected.

Best regards,

Jan

Highlighted
Cisco Employee

Re: AnyConnect VPN full tunnel with internet access

Hi Jan,

If you feel comfortable then you can post your config here (?) and I can take a look Or You can open a TAC case and continue from there.

Thanks,

Naman

Highlighted

Check the default gateway

Check the default gateway assigned to clients when full tunnel is used.
Is the one correct one ?
If not (other than .1) check this out

https://supportforums.cisco.com/discussion/10780776/how-can-i-specify-default-gateway-anyconnect-users-local-ip-pool
 

Highlighted
Beginner

And what solution?.... I have

Solved!

"webvpn sslvpn-vif nat inside" in global configuration!