02-26-2019 03:10 AM - edited 02-21-2020 09:34 PM
Hello,
I'm trying to connect a CentOS 7 to a Cisco VPN with Anyconnect 4.4.03034 or 4.6.02074.
However I'm having the following error:
notice: Connection attempt has failed.
error: The AnyConnect package on the secure gateway could not be located. You may be experiencing network connectivity issues. Please try connecting again.
In attach the log file where I replace the server name and IP.
Thank you for your help.
Regards,
Alexandre
Solved! Go to Solution.
02-26-2019 05:07 AM - edited 02-26-2019 05:23 AM
Hi,
Download the image from the Cisco website, copy the file to the ASA via SCP/TFTP etc and then from the command line do the following (replace the .pkg name if depending on the exact file name you downloaded).
Example:-
webvpn
anyconnect image disk0:/anyconnect-linux64-4.6.04056-webdeploy-k9.pkg
anyconnect enable
Here is a more detailed example
02-26-2019 03:15 AM
02-26-2019 05:03 AM
Hello,
Thank you for your answer I'm under CentOS 7 with command lane only.
Can you guide me to the manual that explain that section please?
Regards,
Alexandre
02-26-2019 05:07 AM - edited 02-26-2019 05:23 AM
Hi,
Download the image from the Cisco website, copy the file to the ASA via SCP/TFTP etc and then from the command line do the following (replace the .pkg name if depending on the exact file name you downloaded).
Example:-
webvpn
anyconnect image disk0:/anyconnect-linux64-4.6.04056-webdeploy-k9.pkg
anyconnect enable
Here is a more detailed example
03-04-2019 12:31 AM
Hello,
Thank you for your help it helps me to understand the problem and I'm now able to connect to the VPN.
Regards,
Alexandre
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide