cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
445
Views
0
Helpful
5
Replies
Highlighted
Beginner

AnyConnect VPN

Hello

I have SSL VPN tunnel enabled on my RV340 router and I can access it from remote.

But I can access only one IP address witch is router address and anything else.

Is it possible to configure VPN to use AnyConnect and have access to all hosts of remote lan?

 

Thanks in advance

L.

5 REPLIES 5
Highlighted
VIP Mentor

Re: AnyConnect VPN

Yes, as long as you have added them to ACL to allow.

 

for reference :

 

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5519-configure-secure-sockets-layer-virtual-private-network-ssl-v.html

BB
*** Rate All Helpful Responses ***
Highlighted
VIP Advisor

Re: AnyConnect VPN

short answer yes you can.
Highlighted
Beginner

Re: AnyConnect VPN

Hi

 

Can you show me an example for it? Is there something special for VPN or is that just a simple ACL rule?

When I allow WAN1 ip pool set in my SSL VPN configuratiion to VLAN1 it still doens't work.

 

Thanks in advance

LK

Highlighted
Beginner

Re: AnyConnect VPN

Hello

 

My VLAN1 network is 192.168.100.0/24

My VPN network is 10.0.0.0/24

 

Any reference how to allow VPN network to access to VLAN1 via ACL?

 

Thanks in advance

L.

Highlighted
Beginner

Re: AnyConnect VPN

Can you provide solution how to?

 

Thanks.