ASA 5506-k9 cannot create tunnel interface and crypto IPsec profile
I have a cisco ASA 5506-k9 and trying to configure IPsec VTI on it and tried inputting command of interface tunnel 10 in global configuration mode, but an error accrues saying "ERROR: % Invalid input detected at '^' marker". so I used ? after interface then there is no any commands or options of tunnel after that. I also followed manual that provided by cisco but did not work out.
I think the 5506 supports tunnel interface but i just cannot do that and cannot figure what issues are in this case.
crypto ipsec profile command is same as tunnel interface. there is no option of it.
I have been struggling with this for over 2 weeks and i really need your help.
BenefitsDocumentationPrerequisiteImage Download LinksSupported PlatformsLimitationsLicense RequirementsTopologyStep-by-step ConfigurationConfigure PATCreate Custom ZonesCreate Class MapCreate the Policy-mapCreate Zone PairAssign the Interfaces to the Zone...
Listen: https://smarturl.it/CCRS9E20Follow us: https://twitter.com/CiscoChampion
With over one trillion email scams per year, more than 22 billion records were exposed by data breaches in 2021. Phishing attacks are clearly on the rise, and they’re e...
Radius server configuration for 802.1X
Server radius test1
Address ipv4 10.1.1.1
Server radius test2
Address ipv4 10.1.1.2
aaa group server radius TEST-gr
server name test1
server name test2
Umbrella’s cloud-delivered firewall (CDFW) is a cool features that provides Firewall Services in the Cisco Umbrella Cloud without the need to deploy on-premises firewall devices and visibility and control for internet traffic across all branch offices. To...